can i mount my amcrest camera upside down and flip the video

Using a 9/16 Hex Head drill bit, drill the lag bolts into the applied holes to secure the camera to the surface area.

Align the mounting bracket to the drilled holes and place a 5/16 lag bolt into the mounting bracket holes.

Using a 9/16 drill bit, drill additional holes into each marked area to insert the appropriate lag bolt screws.

Run the camera wiring through the mounting bracket and to the applied 1” hole created for in-wall installation.

Remove the mounting bracket and using a 1” paddle bit, drill a hole into the center of the surface area.

Using the mounting bracket, mark holes in the appropriate areas you would like to mount the camera.

Using a 3/16 Allen wrench, remove the three security screws from the mounting bracket of the camera to remove the unit from its base.

Note: In-wall installation is when the cables run hidden inside the ceiling or wall. Please ensure the following tools are available and ready for use: The camera will come with proper installation materials such as screws and anchors already, however, if replacements are needed a 9/16 lag bolt, masonry anchor, cement anchor will be required. For more information on attached the WiFi antenna to the camera, please view the video provided below: To properly secure the antenna to the antenna post, turn the antenna clockwise until the antenna is secured to the post. To ensure proper connectivity of your WiFi device, install the provided WiFi antenna onto the antenna post located on your camera. If the antenna is not installed properly on your camera, WiFi will not function. Please also make sure BEFORE INSTALLING YOUR CAMERA, that the WiFi antenna is securely fastened to your device. To install, link one carabiner to the mounting bracket then link the third carabiner to the camera. These carabiners will be used to provide additional support to the camera after installation. Note: There are 3 carabiners included with the camera. Prior to installation, please ensure that the installation environment can support at least three times the weight of the camera and the installation bracket.

These environments included wood, masonry (brick /block walls), and cement. This installation guide will highlight how to properly install and mount your camera in several different environments. Physical Installation Guide (WiFi Speed Dome Camera)

Can i mount my amcrest camera upside down and flip the video